|
There are
approximately 40 million masonry chimneys in North America and the most common problem
with these structures is water penetration. Water causes over 1 billion dollars in damage
annually in the form of staining, loss of insulation value, freeze-thaw damage,
deterioration, and ultimately structural failure.
All new and existing masonry chimneys are susceptible to water damage and, even if
repaired, chimneys will continue to deteriorate if they are not protected. Chimney
Saver®, which comes with a 10 year warranty, is the first water repellent specifically
developed to protect chimneys from the severe weather conditions to which they are
exposed. |
ChimneySaver
is a water repellent not a water sealer. The difference could save you hundreds, or even
thousands of dollars in repairs because sealers can actually damage masonry. Unlike
waterproofing sealers that remain on the surface and trap water vapors, chimney saver
penetrates deep enough to protect masonry from destructive water penetration.
Water damage can be prevented.
Chimneys are highly exposed to the elements and, if left unprotected, are susceptible to
structural deterioration. It is important to address this problem before serious damage
occurs.
Superior Technology
ChimneySaver contains patented siloxanes small enough to penetrate most masonry pores up
to ¼" or more. These special siloxanes form strong bonds with the silica in masonry
and concrete. Because of this bonding process, one application of chimney saver provides
up to ten times the water repellent protection of typical sealers.
100% Breathable
Moisture from a variety of sources is always present in masonry and concrete. Sealers and
silicone coatings form a water resistant surface film which traps water vapors. If these
vapors cannot escape, they will contribute to spalling, scaling, deterioration, and
freeze-thaw damage. ChimneySaver is 100% vapor permeable - a non film-forming water
repellent that penetrates and lines masonry pores. ChimneySaver offers the best protection
because it releases water vapors and effectively reduces water absorption.
Superior Value
The superior value and added benefits of protecting your masonry with ChimneySaver® are
obvious when comparisons are made with popular retail brands of water sealers. Long-Term
Protection ChimneySaver is an investment in long-term protection that will help prevent
expensive reconstruction. No water repellent, however, is a substitute for good
construction and workmanship. The first step in preventing water damage is to make
necessary repairs to structural cracks, damaged crowns, flashings, deteriorated bricks,
and mortar joints. The second step is to protect porous masonry from further water
penetration by applying ChimneySaver® water repellent. Protection is especially needed
when a new chimney liner has been installed. If repairs and preventive measures are not
taken, the old chimney will continue to deteriorate around the new liner. USE ON ALL
MASONRY SURFACES. Not just for chimneys, ChimneySaver® water repellent is the ideal
choice for protecting all residential and commercial-grade masonry. ChimneySaver is the
best solution for a variety of exterior masonry applications including patios, walkways,
pool decks, and wall systems. |
